IA 2018 Proceedings Page

To find the paper you are looking for, use Control F and enter keywords


Air Cleaning and Filtration 2: Photocatalysis and novel mechanisms (ACF3)
Electrosorption of gaseous volatile organic compounds onto technical adsorbents
Efficiency assessment of a commercial photocatalytic coating to degrade NO under real-world conditions in an equipped experimental chamber
A study on the valorization of titanium from chemical milling baths to design photocatalytic coatings for air depollution applications
Control of bioaerosols in hospitals by high antimicrobial activity of silver nanoparticle synthesized by adsorption with chitosan- TiO2 composite
Phytoremediation of benzene from indoor air by ornamental plants
The Performance of a Novel Nanofibrous TiO2 Photocatalyst for the Decomposition of Toluene in Air

 
Air Cleaning and Filtration 4: Sorbents (ACF4)
Evaluating air purification technologies for the aircraft cabin environment
Prediction of the Time-Dependent Efficiency of Adsorbent-Based Air Cleaners for Gas Pollutants
Evaluating the performance of CO2 sorbent materials for indoor air cleaning applications
Functionalized mesoporous materials to capture carbonyl compounds such as aldehydes
Toluene Adsorption Performance of Mortar Adhesives Using Carbon nanomaterial for Improving Indoor Air Quality
On the Dependence of the Partition Coefficient on the Challenge Concentration of VOCs on Activated Carbon: An Experimental Study

 
Building Simulation and CFD 1 (BSC.P1)
Can modeling tools be a reliable source of information on IAQ with only a limited set of data on the studied case?
Numerical investigation on the flow pattern of defeathering machines
Study on Numerical Simulation of Ice Removing System for EMU Train in China
Indoor Air Quality Effect of Fan Surface on Dust in Fan Blade Rotating
Particle Image Velocimetry Investigation for a Scaled Model of an Industrial Hall
Analysis and Planning of Indoor Ventilation for Shrimp Farming

 
Building Simulation and CFD 2: Airflows and Methods (BSC2)
Statistical Analysis of wind speed using K-means clustering
Wind tunnel experiment and CFD simulation on pollutant inter-unit dispersion in U-type street canyons
The diurnal cycle of urban thermal environment in street canyons by scale-model outdoor field measurement
Transport of Gaseous Pollutants from Underground Garage in High Residential Building under Mediterranean Climate
Discovery of environmental secrets for historical artefacts: how did micro-climate evolve in ancient tombs in initial phase
Performance of LES on non-uniform grids in a ventilated generic enclosure

 
Chemistry and Transformations 1 (CT.P1)
Reaction between ozone and limonene under reduced pressure conditions simulating an aircraft cabin environment
Indoor-outdoor connection of PM2.5 constituents
Experimental study on DEHP adsorption characteristics onto airborne fine and coarse particles
Analysis of Particulate Phase Squalene-Ozone Reaction By-Products
Initial studies on the photosensitized chemistry of nitrogen oxides
Photocatalytic paints: improving a new binder to reduce VOCs emissions
Impact of green roof surfaces on O3 levels near building ventilation supply
Quantitative detection method of semiquinone radicals absorbed on particulate matters

 
Chemistry and Transformations 1: Ozone (CT1)
Determining The Reaction Rate Of Ozone In Residential Garages
Ozone deposition in portable classrooms in central Texas
Ozone chemistry of building enclosure insulation materials
Impact of indoor surface mass accretion on heterogeneous ozone chemistry
Indoor Ozone Estimation from Outdoor Ozone and LBNL RC data 2001-02
Effect of surface aging and soiling under real conditions on indoor surface reactivity with ozone

 
Chemistry and Transformations 2: Novel Advances (CT4)
Investigation of Molecular Composition and Phase Partitioning of Organic Particles and Gases in a Residential Environment with Natural Ventilation
A detailed modelling study of the impact of lighting on indoor air chemistry
Crystal Clear? Spectro-Microscopic Analysis of Indoor Glass Surfaces
Aging of thirdhand tobacco smoke aerosols in the absence and presence of ozone
Development of ISAM, a new indoor sectional aerosol model - linking gas-phase chemistry to aerosol through INCA-Indoor
Chemical composition of airborne particles inside and outside a Swedish residence assessed by real time aerosol mass spectrometry

 
Chemistry and Transformations 3: Methods and Detection (CT2)
Development of a Peracid Vapor Sampling Method
Reaction products formed on solid sorbents during analyses of very volatile organic compounds (VVOCs)
Gas-phase detection of amines and their influence on terpene ozonolysis
Development of a Field-Portable Cavity-Ringdown Spectrometer for In-door Measurements of the Nitrate Radical (NO3•)
Impacts of Natural Ventilation on Gas and Particle Phase Organic Compounds Indoors: Insights from Chromatogram Binning - Positive Matrix Factorization Analysis
Development and use of a portable surface flow reactor to investigate uptake of VOCs to indoor surfaces

 
Chemistry and Transformations 4: Indoor Sources (CT3)
The major role of temperature on indoor concentrations of air toxic VOCs in 9 houses based on in-situ high time resolution measurements
Dynamic chamber method for measuring particle/air partition coefficient of indoor semi-volatile organic compounds (SVOCs)
Non-combustible air fresheners: exposure and health risk assessment
Impact of changing cleaning product formulation on indoor air chemistry
Time-Resolved Measurements of Indoor Chemistry, Emission Rates, and Deposition Velocities in a University Art Museum
Skin and breath emissions as a source of indoor air pollution in a classroom

 
Chemistry and Transformations 5: Oxidants and NOx (CT5)
The fate of OH and RO2 radicals in presence of TiO2 nanoparticles embedded in paints
The Interaction Between Indoor Relevant Organic Compounds on Silica Surfaces at Different Relevant Humidities
Changes in outdoor pollutant concentrations and environmental conditions along the height of a tall building
Nucleation of Ultrafine Particles Arising from Oxidation of Cigarette Smoke in Indoor Environments
Measuring the penetration factor of outdoor NO2 and NOx in an unoccupied apartment unit
Time-resolved Characterization of Indoor Oxidants in a New York Home

 
Comfort, Productivity, and Perception 1: Productivity and Performance (CPP2)
Effects of Activity-Based Workplace Design on Occupant Behavior and Productivity
The effects of indoor carbon dioxide concentrations on arousal level and task performance
The effect of low ventilation rate on perceived air quality and work performance - A laboratory study
Investigating the link between indoor environment and workplace productivity in an office environment
Modeling Thermal Comfort and Performance Outcomes in 92 Finnish Office Buildings
Beneficial effects of physical activity in the office on workplace productivity

 
Comfort, Productivity, and Perception 2 (CPP.P2)
Changes in EEG signals at varying air temperature and relative humidity
Study on the optimal temperature change pattern for sleep quality of people in the hot-humid area of China
Study on the optimal air velocity change pattern for sleep quality of people in the hot-humid area of China
Adaptive Environmental Comfort in Mixed Dormitories During Summer in Japan - Field Study
A breath of fresh air: engaging students with air quality science in New Zealand schools
Fine Classification of "Hiesyo" Based on Differences in the Physiological and Psychological Responses between "Hiesyo" and "non-Hiesyo"
Research on Heat Stress of Construction Workers in Summer with High WBGTeff in Chongqing, China

 
Comfort, Productivity, and Perception 2: Human Responses (CPP3)
The effects of elevated temperatures with high relative humidity on human responses
Local thermal discomfort caused by temperature stratification at whole-body thermal neutrality
Effect of the Diversity Factor on the Indoor Air Quality Perception
Sleep and Physiological Responses in Shelter-Analogue Settings during Winter
Thermal response and local thermal comfort of asymmetric radiant environment
Evaluation of Thermal Environment with Elevated Air Speed using a Breathing Thermal Manikin

 
Comfort, Productivity, and Perception 3 (CPP.P3)
Can simulated natural wind provide a better-differentiated air perception?
Human thermoregulatory responses during sleep
Sleep quality and Thermal environment in Bedrooms in Malaysia
Designing an Individually Controlled System based on children's perception and preferences of IEQ in a classroom
Indoor Thermal Environment Control Based on Thermal Sensations Predicted by Smart Wrist Band
Characterizing Farm Polyethylene Plastic Film High Tunnels Indoor Air Environmental Quality Measures
Impact of moisture buffering capacity of interior objects on hygrothermal performance and perception of indoor air quality in a room

 
Comfort, Productivity, and Perception 5: Thermal Models and Assessments (CPP4)
Urban Thermal Environment Measurement and Evaluation Using Small-scale Measuring Equipment
Development of New Human Thermal Model based on Blood Flow Rate Measurements under Different Temperature Conditions
Evaluation of Clothing Thermal Insulation based on Human Thermoregulation Model by Measuring Skin and Clothing Temperature
Experimental Investigations of Thermal Comfort in a Passenger Car under Driving Conditions
Evaluation of the Thermal Environment of Waiting Room at Small-scale Railway Stations in Cold Regions
An Outdoor Thermal Comfort Model for Predicting the Probability Distribution of Thermal Sensation

 
Comfort, Productivity, and Perception 6: Awareness and Control (CPP5)
Development of an Integrated Task/Ambient Air Conditioning Outlet - Evaluation of a Single-Fan Outlet through Actual Office Measurements
Preliminary Results: Different Indoor Classroom Conditions during Different Seasons in the U.S. Midwestern Region and their Associations with Student Absenteeism
A comprehensive approach to evaluating the urgency of IAQ measures
The Effect of a Low-Energy Wearable Thermal Device on Human Comfort
Heating and cooling the human body with energy-efficient personal comfort systems (PCS)
Experimental Evaluation of the Micro-Environmental Control System in Maintaining Thermal Comfort

 
Concentrations and Exposure 1: Novel Approaches (CE1)
Evaluation of a Heated Graphite Scrubber for UV-Absorbance Measurements of Ozone
Investigating the role of hydrogen in the calibration of MOS gas sensors for indoor air quality monitoring
Indoor particle age, a new concept for improving the accuracy of estimating indoor airborne concentrations of semivolatile organic compounds (SVOCs)
Quantifying the error of a low-cost particle monitor: common indoor residential aerosols
Assessing indoor air toxicity with condensate collected from air using the mitochondrial activity of human BJ fibroblasts and THP-1 monocytes
Airborne toxicity of a non-ionic alcohol ethoxylate surfactant and wetting agent used in cleaning chemicals

 
Concentrations and Exposure 2: Schools (CE2)
IAQ in High-Performance, Urban Schools: A Review
Characterizing School Building Conditions & Related Impacts on Occupant Health, Safety & Well-Being, Utilizing A Combinational Crowd-Sourcing, Citizen-Science, & Sensor-Based Model
Distribution of 1000 free indoor air quality measurement kits to schools: kits as an alternative method proposed by the French regulation
Indoor air quality in French schools: a nationwide study (2013-2017)
Research on the PM2.5 and CO2 concentrations of the Classrooms in Beijing
Indoor particle concentrations in high school classrooms

 
Concentrations and Exposure 3: Formaldehyde (CE3)
Performance Validation of Real-time Formaldehyde Sensors through Lab Testing and in a Real Building
Diurnal Formaldehyde Concentrations in High Schools
Formaldehyde concentrations and air exchange rates in European housings
Characteristics and inhalation cancer risks assessment of exposure to VOCs in 20 asthmatic children?s homes in Shanghai
Formaldehyde passive sampler using an optical chemical sensor: design optimization to limit humidity interference
Accuracy of Three Types of Formaldehyde Passive Samplers

 
Concentrations and Exposure 4 (CE.P4)
Review on Indoor Environment Monitoring Methods
Seasonal Variation of Indoor Air Quality and Indoor Thermal Conditions of 220 Classrooms in the Midwest Region
Experimental study on kitchen pollutant transmission in an apartment
Winter field measurements on residential indoor volatile organic compounds (VOCs) in Hangzhou, China: a preliminary study
Low-cost air quality sensors: key to data abundance?
Indoor temporal variation of volatile organic compounds in 4 occupied university classrooms in China: a pilot study
An investigation into indoor air quality in volume apartment buildings in Melbourne, Australia
Field measurements on PM1, PM2.5 and PM10 exposure levels inside a long road tunnel in Dalian, China

 
Concentrations and Exposure 4: Influences from Outdoors (CE4)
Impacts of Wildfire and Traffic-Related Air Pollution on Indoor Air Quality of Low-Income Residential Households in Colorado, USA
Ultrafine particle penetration from outdoor to indoor environments
Using improved methods to measure the transport of outdoor ozone and fine and ultrafine particulate matter into residential buildings
Indoor-to-outdoor particle concentration assessment for human exposure analysis
Estimating PM2.5 penetration factors and deposition rates in a dwelling using a combined blower-door test
Indoor/Outdoor Relationships and Anthropogenic Elemental Signatures in Airborne PM2.5 at a High School: Impacts of Petroleum Refining Emissions on Lanthanoid Enrichment

 
Concentrations and Exposure 5 (CE.P5)
Lung-deposited particle surface area (LDSA) and black carbon (BC) in high-rise apartments in Seoul, Korea
The actual population exposure of outdoor PM2.5-bound elemental carbon modified by infiltration in Beijing
Comparison of weekday and weekend hourly distribution of indoor ultrafine particulate matter (PM2.5) concentrations with daily activity patterns in asthmatic children's home in South Korea : Preliminary study results
Indoor Air in Healing Environments: definition of a monitoring activity in inpatient wards for design and management strategies in healthcare facilities
Indoor air quality assessment in 38 ClimACT schools
Analysis on indoor air pollution in the dental clinics
Distribution and sources of indoor and outdoor fine polycyclic aromatic hydrocarbons during winter and spring in Beijing

 
Concentrations and Exposure 5: Indoor Particle Sources (CE5)
Dynamics of Fine and Ultrafine Particulate Matter in Biomass Burning Kitchens in Western Kenya
Emission Factors of Fine Particulate Matter, Organic and Elemental Carbon, Carbon Monoxide and Carbon Dioxide from Briquettes Made from Human Waste
Ultrafine particle emissions and decay rates due to burning candles in a residence
Exposure to particles in secondhand vapor from e-cigarettes
Pollutant emissions from a newly designed domestic space heating stove: comparison of various biomass pellets
Rapid Assessment of Indoor and Outdoor PM2.5 Air Pollution Levels and Determinants in Rural Jalapa, Guatemala

 
Concentrations and Exposure 7: Transmission and Dispersion (CE9)
Validated numerical simulations of wall-mounted kitchen range hood pollutant capture and sensitivity tests to inform development of a method of test
Effect of Surface Roughness on Droplet Resuspension Behavior
Face-Touching Frequency for Evaluation of Infection Risk
Experimental Measurements of Thermal Plumes Profiles over a Simulated Patient on an Operating Table
Experimental Modelling of Infectious Aerosols from People with Cystic Fibrosis
Human Touch Behaviours in a Research Student Office for Application into Fomite Transmission of Diseases

 
Concentrations and Exposure 9: Residential Environments (CE7)
Temporal and Spatial Variability of Multiple Contaminants in a Residence
Predicting Indoor Concentrations of Black Carbon in Residential Environments
A Review of Contaminant Concentrations in Social Housing
Time-resolved exposure to volatile organic compounds in two California residences
Impact of Environmental Factors on Radon
Indoor/outdoor relationship of fine and ultrafine particles: A study of 20 private dwellings in Germany

 
Energy, Climate Change, and Policy 1: Household Energy (ECCP1)
Assessment of Household Air Pollution from Burning Firewood and Yak Dung on the Eastern Tibetan Plateau
A Culturally-Appropriate Household Heating Energy Transition for the Navajo Nation
Analysis of rural household energy consumption based on on-site survey in Chongqing, China
Associations between energy retrofits and indoor air quality parameters in Finnish and Lithuanian multi-family buildings
Characterizing the impact of biomass pellet re-loading mode on cookstove thermal and emission performances
Preliminary Indoor Air Quality Impacts of Clean Space Heating Programs for Rural Homes in Northern China

 
Energy, Climate Change, and Policy 2 (ECCP.P2)
Post occupancy evaluation of a sports pavilion within an educational establishment
Establishing the impact of occupant behaviour on energy reductions from a listed historic dwelling retrofit
Indoor Air Quality Management Business Innovation: The Lean-Thinking Story
Comparison of Outdoor, Indoor, and Personal PM2.5 Exposure between the Villages with/without Coal Burning in China
Field Test of the Earth Tube in a Subtropical Region
Radon and Home Weatherization Assistance
Research on energy reduction methods using IoT (Internet of Things)
Solar ventilated fa?ade with PCM integration for air preheating

 
Energy, Climate Change, and Policy 2: IAQ Policies and Standards (ECCP2)
Managing the indoor environmental needs of hospital occupants: a facilities management perspective
Updated Constructional Guidelines for Implementation of Healthy Building in Remediation in Finland
National and International IEQ Guidelines
RTS GLT-Environmental Classification -Experiences and New Developments
Tightening Standards for Indoor Levels of PM2.5: A Promising Approach for Reducing PM2.5 Associated Mortalities in Urban China

 
Energy, Climate Change, and Policy 3: Energy, Climate, and IEQ (ECCP3)
A tool to quantify emission reductions and climate/health co-benefits from building energy use reductions
Balancing Indoor Air Quality and Energy Efficiency, District-scale Improvements with Life Cycle Benefits
Assessing the Potential Impact of Climate Change on Particle Infiltration in Two US Cities: Boston, MA and Atlanta, GA
Impact of outdoor climate and ambient air pollution on indoor air quality
Investigating the Relationship between Transportation and Building Energy Use in Philadelphia Households
Energy consumption analysis of railway passenger stations in various climate regions in China

 
Health Effects and Epidemiology 1: Allergy and Asthma (HEE1)
Home Air Conditioning Mitigates Effect of Ambient Temperature on Asthma and Allergic Rhinitis among Preschool Children
Early Findings from Tribal Indoor Air Quality Study
Association between Air Change Rate and Children's Allergic Symptoms in Naturally Ventilated Dwellings in Tianjin, China
Associations between House Dust Phthalates and Children's Allergic Rhinitis in Baotou, China

 
Health Effects and Epidemiology 2 (HEE.P2)
Causal structures of association between home dampness during winter and allergic disease among children in cold climatic regions of Japan
Relationship between indoor temperature in winter and Brain Healthcare Quotient
Health Risk Assessment of Residential Characteristics and Indoor Air Quality of Naturally Ventilated Buildings in Nigeria
Is the air that we breathe during sleep affecting our sleep quality?
Voice Disorders in Teachers and Indoor Air Quality of School Buildings
Investigation of association between indoor environment and elderly's cardio-cerebrovascular disease in China - Design and preliminary outcome

 
Health Effects and Epidemiology 2: Environmental Conditions and Sleep Environments (HEE2)
The Acute Impact of Biophilic Indoor Environment on Stress and Cognitive Function
Multi-level Analysis of the Effect of Indoor Air Temperature on Physical Ability in an Elderly Japanese Population
Identification of human body physiological response to bed micro-environment
Effects of thermal conditions and carbon dioxide concentration on building-related symptoms: a longitudinal study in air-conditioned office buildings
Influence of environmental humidity on oral dryness among nursing home residents in Japan
Low Indoor-Air Humidity in an Assisted Living Facility is Correlated with Increased Patient Illness and Cognitive Decline

 
Health Effects and Epidemiology 4: Synthesis Studies (HEE4)
Indoor Environmental Quality, Pupil's Health and Academic Performance: A Summary of Work Done in Finland, USA and Nigeria
A Review of How Home Ventilation Rates Affect Health
A Review of Associations of Dampness and Mold at Schools with Cough, Wheeze, and Nasal Symptoms
An updated review of IAQ and health outcomes of air cleaner use in homes
What do Participants in a Birth Cohort Study Know About Their Homes?
Associations of Household Dampness-related Exposures with Adverse Birth Outcomes in China: A National Retrospective Observational Study

 
Microbiology and Dampness 1: Field Studies (MD2)
The Microbiome of Settling Dust from Childcare Centres in Singapore
Seasonal Dynamics of DNA and RNA Viral Bioaerosol Communities in a Daycare Setting
Microscopic roommates: The biological sources of indoor air bacteria of single-family homes in Portland, Oregon
Longitudinal assessment of the influence of lifestyle homogenization on the microbiome in a cohort of United States Air Force Cadets
Spatial and longitudinal influences on accurately predicting a microbiome 'biofingerprint' 
Characterization of biological contaminants in 50 elementary schools in a large city

 
Microbiology and Dampness 2: Bacterial and Fungal Growth (MD1)
Comparison of two test methods to assess the resistance of bio-based insulation materials against moulds
Microbial Community and Metabolic Succession on Common Building Materials under High Relative Humidity Conditions
Ventilation, Thermal Comfort and Cleanliness of High Contact Surface in Nigerian Schools
Assessment of the mould contamination in efficient-energy dwellings through the Fungal Contamination Index
The influence of material chemical composition on microbial dynamics of wetted building materials
Mathematical model simulating fungal and bacterial growth on surfaces in indoor spaces

 
Microbiology and Dampness 3: Transmission and Transport (MD3)
Experimental investigation of detaching Aspergillus niger spores from colonies
Microbial concentration on the handlebar of sharing bicycles differs from those of private bicycles
Viral respiratory pathogens on frequently touched surfaces at transportation hubs
Impacts of Synthetic and Natural Indoor Surface Finishes on Microbial Viability
Shut the front door: seasonal patterns in window operation drive fungal and bacterial community dissimilarity between indoor and outdoor air
Predicting the transmission process of viruses on multiple surfaces with a Markov chain model

 
Microbiology and Dampness 4: Methods and Applications (MD4)
Comparison of the methods analysing microbial contamination on building materials
Improving precision in the study of indoor fungi: recent changes and additions in the UNITE database for molecular identification of fungi
Comparing Real-time Ultraviolet-Induced Fluorescence with Hexosaminidase Activity for Assessing Airborne Fungal Spore Loads in Occupied K-12 Classrooms
Quantitative Filter Forensics to Determine the Airborne Concentration of Endotoxins and Allergens in Residential HVAC Filters
Comparison of Real-time Ultraviolet-Induced Fluorescence and Filter Sampling Combined with qPCR Assay for the Measurement of Airborne Fungal Spores
The Redevelopment of Microbial Communities after School Desk Cleaning

 
Microbiology and Dampness 5: Moisture Impacts (MD5)
Relating Moisture Content of Gypsum Board, as Measured by Multiple Moisture Meters, to Water Activity
Determinants of measured moisture and observed dampness in New Zealand homes
Longitudinal assessment of classroom microbiota in relation to moisture damage and dampness
Mould exposure in indoor environments: The French ANSES recommendations to reinforce measures for preventing mould growth and the impact on human health
Control of Humidity-Related Mold Growth in Unoccupied Schools
Gypsum Response to Liquid Water Wetting in Indoor Environments

 
Microbiology and Dampness 6: Future Steps (MD6)
Association between Current Asthma and 36 Fungal Taxa in Residential Dust Analyzed by Quantitative PCR: A Review
A Call for Guidelines to Forward Consensus on Executing Indoor Microbiome Surveys
Low-cost particle sensors: performance evaluation for indoor bioaerosols
Microbiomes of the Built Environment: A Research Agenda
The Metagenomics Analysis of Air, Dust and Surfaces of Tropical Buildings
A Preliminary Study of Microbiome on HVAC Air Filters

 
Sources and Emissions 2: 3D Printers and Consumer Products (SE2)
Targeting off-odors in toys and children's products: From identifying substances to characterizing emissions
Characterization of Three Scent Diffusers using d-Limonene
Chemical and Physical Characterization of 3D Printer Aerosol Emissions with the Aerosol Mass Spectrometer
Emissions from consumer fused deposition modelling 3D printers and their potential health impact
Characterization of Particles and Volatile Organic Compounds Emitted during the Operation of a 3D-Printer

 
Sources and Emissions 4 (SE.P4)
VOC exposure in Belgian dwellings - evaluation with a temperature and humidity based emission model
Simmering Sauces! Elevated Formaldehyde Concentrations from Gas Stove Burners
Formation of Low-Volatility Products in Reactions of Carbonyl Oxide Criegee Intermediates
Determining Radon Entry Rates into Residential Dwellings: Parameterisation Data for Radon Models
Investigation of the quantity of exhaled aerosols released into the environment during jet nebulization
Tobacco Heating System vs Cigarette: Comparison of Aerosol Concentrations in a Simulated Room Environment
Effect of Radiant Cooling on Indoor TVOC Concentration Distribution
Emissions Associated with Misapplied Spray Polyurethane Foam

 
Sources and Emissions 6: Flame Retardants (SE6)
Sorption of organophosphate flame retardants on impervious surfaces
Semi-volatile Organic Compounds in Indoor Settled and HVAC filter dust: Association with Seasons, Childhood Asthma and Building characteristics
Novel Phosphorus Flame Retardants Found from Flame-Retardant Curtains Purchased from Japanese Market
Particle size distribution of organophosphate flame retardant (OPFRs) in indoor dust
Phthalate, Organophosphates, Polybrominated Diphenyl Ethers, Pesticides, and Their Alternatives in Indoor Air and Dust in U.S. High School
Migration Mechanism of Phosphorus Flame Retardants from Flame-Retardant-Treated Polyester Curtains to Indoor Dust

 
Sources and Emissions 7: Field Studies (SE7)
Attached Garage Contaminant Transport and Intervention Results
Assessment of VOC source contributions in newly built timber frame houses using the chemical mass balance model
Contributions of indoor and outdoor sources to fluorescent particle exposure in a residence
Spatially and temporally resolved emissions of volatile organic compounds in a residence
Ozone and Ultrafine Particle Emission Rates in University Copy Rooms
Soil Vapor Intrusion of 1,4-Dioxane Measured using Passive Sampling and Thermal Desorption and GC/MS

 
Special session - Applying Quantitative Microbial Risk Assessment (QMRA) to Estimate Human Health Impacts in the Indoor Air Environment (33)
Estimating exposure to infectious influenza aerosols in roommates of influenza cases during the 2012-2013 season on the University of Maryland campus
Predicting Influenza Exposures in Multi-zone Indoor Environments Using a Complex Infection Transmission Model
Analytical methods for microorganisms in the indoor environment and challenges for exposure assessment
The Quantitative Microbial Risk Assessment Framework Applied to Indoor Inhalation Exposures
Sources of Microorganisms in Indoor Air

 
Special session - Clothing and other textiles as mediators of personal exposure to indoor pollutants (36)
Clothing as collector and emitter of airborne inhalable particles
Removing adhered particles from cloth surface with a mechanical strike
Dermal uptake of benzophenone-3 from clothing: comparison of model to human participant results
Inhalation and dermal uptake of particle and gas phase phthalates - a human chamber exposure study

 
Special session - Compliance in Ventilation Standards using Natural Ventilation (53)
Compliance in Ventilation Standards using Natural Ventilation: Difficulty in quantifying minimum ventilation rate for transient flow
Special session - Computational Fluid Dynamics (CFD) modeling of indoor pollutant transport and human exposure (92)
Distribution pollutants from exhaled jet in stratified environment
3D RANS CFD simulations of gaseous pollutant transport in generic enclosures: two case studies
CFD and Wind Tunnel studies of Flow Patterns and Turbulent Characteristics in Idealized 2-D Deep Street Canyon with various Reynolds Numbers
Coupling a Building Model to an LES Tool to Study Indoor Effects of an Outdoor Contaminant
Investigations on the convective thermal plume around the head of the standing and lying human body
Computational Fluid Dynamics simulations of Personalised Ventilation: Sampling air quality in the breathing zone

 
Special session - Emissions from humans: What do we know and what should we know? (74)
Human bioeffluents: Are exhaled and dermally-emitted bioeffluents different?
Emissions from Humans and Indoor Air Chemistry
The Effects of Bioeffluents on Health Symptoms, Perceived Air Quality and Cognitive Performance - Summary of Current Evidence
Investigating human emissions of volatile organic compounds in a cinema, flux rates, links to scene content, and possible applications
Field measurements of human VOC bioeffluents using PTRMS

 
Special session - Explorations using distributed sensor networks to improve our understanding of the indoor environment and support practices that enhance health (75)
Expanding psychrometrics to enable humidity management through warm radiant comfort delivery
Inhalation exposure to metabolic CO2 and control interventions
Exploring the Influence of Relative Humidity on Human Health in Buildings
Learning Building Occupants' Social Interactions from Wearable and Stationary Ambient Sensing Systems
The Comparative Effect of Temperature and CO2 on Work Performance
Sample Efficiency and Sensor Networks

 
Special session - Frontiers in indoor air chemistry (sponsored by the Sloan Foundation) (56)
Insights on the Multiphase Chemistry of Indoor Trace Gases and Aerosols
Comparison of the Oxidative Potential of Size Segregated Aerosols of Ambient Origin in Indoor and Outdoor Environments
Summary of Special session - Frontiers in indoor air chemistry
Public engagement opportunities for the indoor air community
The role of organic fraction of aerosol particles in uptake of indoor SVOC investigated with real time aerosol mass spectrometry
Identification of Sources of Trace Gases in an Art Museum using Mass Spectrometry and Positive Matrix Factorization
Exploration of the Influence of Amines on Secondary Organic Aerosol Formation

 
Special session - Improving IEQ in schools: the positive health impacts on school community (30)
Baseline IEQ measurements in a school district-imposed intervention based on a massive district-wide renovation project
Assessing Effects of District Wide Renovation Program on Students' Absenteeism: Baseline Data
A study on cleaning effectiveness in schools and students' absence
Reducing Classroom Temperatures in a Tropical Climate Improved the Performance of Elementary School Pupils
Retrofit of school ventilation and pupil well-being and performance - ASHRAE RP1624

 
Special session - Indoor Air Quality in Energy Efficient New Homes: Findings from Field Studies in North America, China and Europe (87)
Indoor Air Quality in energy-efficient buildings in Sweden: comparison with the Swedish residential housing stock and new conventional buildings
Indoor Air Quality in New California Homes with Mechanical Ventilation
Indoor air quality in 72 energy-efficient dwellings in France
Indoor air quality in different age homes
Volatile Organic Compounds (VOCs) in New Homes

 
Special session - Indoor pollutants from emerging smoking and vaping devices: E-cigarettes, ?reduced-risk? tobacco products and waterpipes (28)
Impact of Waterpipe Smoking on Indoor Air Quality
Indoor air quality impact of chemical emissions from electronic cigarettes and heat-not-burn devices
Secondhand and Thirdhand Exposure to Nicotine and Particulates from Electronic Cigarettes
Volatilization and Partitioning to Particulate Matter of Deposited Electronic Cigarette Vapors
Systemic Absorption of Nicotine and Indoor Air Pollution Following Secondhand Exposure to Electronic Cigarettes
Measuring Aerosol Particle Emissions from Cannabis Vaporization and Dabbing

 
Special session - Measurement and experimental challenges is sleep related IAQ studies (43)
Effect of Sleep Quality Based on Sleep Stage on the Next-day Performance in the Morning and Afternoon
Effects of the thermal environment in bedrooms on sleep considering the change in clothing insulation
Special session - Natural Ventilation in China: Dilemma between Energy Use and Indoor Air Quality: Part 1 (65a)
Contribution of different ozone sinks to indoor ozone level in residential buildings in China
Pollution in Chinese homes: how serious is it?
Overview of the National Key R&D Project on Strategies for Improving Ventilation and Indoor Air Quality in Chinese Residential Buildings
How Many Surrounding Buildings Should be Included in Simulating Wind Flow around a Building?
Is oil temperature a key factor deciding PM2.5 emission from Chinese cooking?

 
Special session - Natural Ventilation in China: Dilemma between Energy Use and Indoor Air Quality: Part 2 (65b)
IAQ Impacts of Natural vs. Mechanical Ventilation with Filtration in a Home in Shenzhen China
Optimal ventilation for Chinese homes when simultaneously considering indoor and outdoor pollution
Modeling of volatile organic compounds transport in buildings: A case study in the field
Natural ventilation in China: the state-of-the-art

 
Special session - Numerical modeling of cross-ventilation flows: overview of past studies and discussion on future directions (76)
Analysis and discussion of the performance of RANS and LES for cross-ventilation flow in a generic enclosure
Modeling cross-ventilation with multi-zone models
CFD of cross-flow ventilation of a full-scale cubical building using a time-dependent k-ε SST SAS turbulence model
Coupled indoor/outdoor airflow simulation comparing ANSYS Fluent with a GPU-based lattice Boltzmann model for urban environments

 
Special session - Resilience and adaptation to environmental changes in buildings (89)
Health Impacts of Home Energy Retrofits in Low-Income Residential Households
Factors Influencing Variations of PM Concentrations in Retrofitted Multifamily Buildings in Finland and Lithuania
Relationship between Resilience of Residences and Residents' Subjective Well-being
Assessment of Radon Reduction Interventions with Energy Retrofits
Utilizing a Nationally Representative Model Set to Predict the Impacts of Climate Change on Energy Performance and IAQ in U.S. Residences
Simulations of indoor air quality based on future climate conditions

 
Special session - Smart Technologies for Enhancing IEQ (52)
Smart Technologies and Indoor Environmental Quality: A Symbiosis?
A Wireless Sensor-Actuator Network for Enhancing IEQ
Sensed data for optimizing IEQ and energy consumption of a floor in a Tropical Building
Summary of Special session - Smart Technologies for Enhancing IEQ
Developments in multisensor monitoring of indoor air quality
A low-cost user-friendly indoor environmental quality (IEQ) calculator for monitoring poor living environment

 
Special session - The use of low-cost sensors for monitoring indoor air and exposure (72)
Characterizing indoor-outdoor PM relationships using low cost monitors during two heating seasons in Rochester, New York
An evaluation of low-cost particulate matter and CO2 sensors and their applications
Development of a smartphone-based app for determination of formaldehyde concentration indoors
Opportunities and barriers to the use of continuous, distributed indoor environmental sensing in green building rating systems
A Versatile Platform for Low-Cost PM Measurements

 
Special session - TILT: Identifying Initiators and Triggers of Chemical Intolerance (81)
Summary of Special session - TILT: Identifying Initiators and Triggers of Chemical Intolerance
Using the QEESI Symptom Star to Document Chemical Intolerance: A Case Study
Validated Clinical and Epidemiological Approaches for Assessing Chemical Intolerance: The QEESI and BREESI
What Initiates Chemical Intolerance?
Environmental House Calls (EHC): Procedures and Methods in a Study to Identify Triggers for Chemical Intolerance
Indoor Air, Chemical Intolerance, and Toxicant-Induced Loss of Tolerance (TILT)
Environmental House Calls (EHCs): Findings from the Toxicant-Induced Loss of Tolerance (TILT) Research Project

 
Special session - Translating sleep IEQ research into new residential ventilation standards (44)
Energy efficient reduction of exposure to airborne particles while sleeping
Indoor air quality during sleep

 
Special session - Water on surfaces and dust: Implications for indoor chemistry and microbiology (sponsored by the Sloan Foundation) (85)
Dynamics of residential oxidized organic gases: Insights into sources and sinks
When Does Wet Drywall Not Grow Mold?
Primary and secondary plasticizer emissions in relation to material and ambient conditions - case descriptions from new buildings
Building and Environmental Factors that Influence Bacterial and Fungal Loading on Air Conditioning Cooling Coils
Gene Expression of Fungal Communities in Damp Buildings: Implications for Human Health
Modeling Microbial Growth in Carpet Dust at Varying Relative Humidity Levels using the "Time-of-Wetness" Model

 
Special session - What are the impacts of humans and their activities on indoor chemistry? (sponsored by the Sloan Foundation) (61)
An overview and early results from the HOMEChem Indoor Air Chemistry Field Campaign
Aerosol-Phase Effects of Occupants on the Indoor Environment
Indoor Oxidant Interplay: Illumination, Intrusion, and Immolation (Cooking)
Interpreting time-resolved residential monitoring data to characterize emissions of volatile organic compounds from occupant activities
First high-time resolution HCl measurements indoors: Evidence for direct emission and indirect formation
Third hand smoke contribution to indoor aerosol in a non-smoking classroom

 
Ventilation and HVAC Systems 3 (HVAC.P3)
Effects of Ventilation Methods on Indoor Air Quality of HVAC-Equipped Public Elementary Schools
The future of passive techniques in air change rate measurement
Local Determination of the Building Envelope Air Leakage
Variability in Dwelling Air Exchange Rates due to Meteorological Conditions
The effect of the thermal obstructions on the velocity and temperature field in an operating room with laminar airflow
Modular and Adjustable Ventilation Using Induced Jet Fans for a Multi-Purpose Large Space
Methodology to assess the exposure to cooking emissions in combination with the efficiency of range hoods

 
Ventilation and HVAC Systems 3: Natural Ventilation and Infiltration (HVAC1)
Predicting Window Opening Behavior of Individual Occupant Using Machine Learning Models
Determination of Window Operation Schedules in Chinese Residential Buildings
What does "Use with adequate ventilation" mean?
Validation of cross ventilation models in a multi-zone residential apartment
Window opening occurrence in the US: Influence of climate and region
Ventilation and Communication between Hidden and Occupied Spaces in Portable Classrooms: Air Flow and Labelled Particle Movement

 
Ventilation and HVAC Systems 4 (HVAC.P4)
Research on influence factors of unorganized fresh air in subways
An Investigation of Control Strategy Approach of Heat Pump in a Dehumidification System
Is the thermal comfort and ventilation of New Zealand (NZ) classrooms following the newly-released requirements?
Heat Exchange Performance of High Efficiency Heat Pump System
Natural Ventilation Rates through Windows in Homes
Effect of ventilation on indoor particle and CO2 concentration in public transport buses
Modeling the energy impacts of underground garage ventilation strategies
Enhancement of capture velocity with an annular slotted-hood

 
Ventilation and HVAC Systems 6: Fluids and Flows (HVAC5)
Influence of entrance configuration on the performance of solar chimney
Development of a New Ventilation System for Commercial Airplane Cabins
Experiment study of air flow pattern under ceiling fan with Color Sequence Particle Streak Velocimetry
Wind tunnel tests of pressure coefficient distribution and inter-flat pollutant transmission in a rectangular multistory residential building
Study on Air Conditioning System Promoting Coanda Effect by Applying Shape of PC Ceiling Slab
Experimental study of human thermal plumes in a small space via large-scale TR PIV system

 
Ventilation and HVAC Systems 7: Residential Ventilation and Infiltration (HVAC6)
Indoor air toxic gases levels in a net-zero energy house under multiple ventilation system settings
Estimating Effective Ventilation Rates in Rural Homes Using Polluting Fuels
Development of a Natural Soil Depressurization System Sizing Tool
Impacts of HVAC Sequencing on Runtime
Improved Sealing of Attached Garages Reduces Infiltration of Polluted Air into Adjoining Dwelling Spaces
Long-term Air Exchange Rates in a Residence
Corporate and Other Organizational Members
Any reference obtained from this Website to a Corporate/Other Organizational Member does not constitute or imply an endorsement by ISIAQ of the product, process, or service, of its producer or provider. The views and opinions expressed by any Corporate Members do not necessarily state or reflect those of ISIAQ.
Sani Service LogoIPVideo Corporation